Deck, fence & wood staining
Deck and fence staining in Sarasota & Bradenton
Decks, fences, pergolas, doors and wood surfaces cleaned, prepared and stained to bring out the grain and protect it from Florida sun and rain.
Protect your wood from sun, rain and mildew
MA Performance Renovations stains and seals wood decks, fences, pergolas, railings, gates and doors in Sarasota, Bradenton, Lakewood Ranch and nearby communities. In our climate, unprotected wood turns gray, dries out and grows mildew quickly; the right stain blocks UV, repels water and keeps the wood looking rich for years.
Every project starts with preparation: we clean the wood, remove loose old finish and mildew, sand rough spots and replace or fasten loose boards when needed. Then we apply a quality stain in the opacity you choose, from transparent and semi-transparent that show the grain to solid colors that hide wear.
What we stain
Wood surfaces inside and out
-
Deck staining
Deck boards, stairs and railings stained and sealed to resist foot traffic, sun and pool water.
-
Fence staining
Wood privacy fences and gates stained evenly on both sides for a uniform, long-lasting color.
-
Pergolas & railings
Overhead and hard-to-reach wood structures cleaned and stained to stop graying and cracking.
-
Doors & interior wood
Front doors, beams and interior wood stained to highlight the grain and match your style.
How we work
Prep is what makes stain last
-
Clean
We wash the wood to remove dirt, mildew and loose old finish, then let it dry completely.
-
Repair & sand
Loose boards are fastened and rough or gray areas sanded so the stain absorbs evenly.
-
Stain
We apply the stain you choose by brush and roller, working board by board for an even color.
-
Seal & inspect
A protective coat is applied where needed and we walk the finished project with you.
Questions
Frequently asked questions: Wood Staining
How often should a deck or fence be stained in Florida?
In the Sarasota and Bradenton sun, most decks need re-staining every 2 to 3 years and fences every 3 to 5 years. Horizontal surfaces wear faster than vertical ones because they get more sun and water.
Semi-transparent or solid stain: which is better?
Semi-transparent stain shows the natural wood grain and is ideal for newer wood in good condition. Solid stain looks more like paint, hides wear and repairs and gives the longest UV protection, so it suits older wood.
Can you stain new pressure-treated wood?
New pressure-treated wood needs time to dry before it accepts stain, usually several weeks to a few months in Florida. We can test the wood and tell you when it is ready.
Do you clean the wood before staining?
Always. We clean the wood and remove mildew and loose finish before staining, because stain over dirt or mildew peels and fades early.
What is the best weather for staining?
Dry days with mild temperatures. In Florida we plan around afternoon rain, and the wood must be dry for at least a day before staining. We schedule your project with that in mind.
Service area
Serving Sarasota, Manatee and the Gulf Coast keys
We come to you for a free in-home estimate anywhere from Palmetto and Parrish down to Venice, including the barrier islands.
- Sarasota, FL
- Bradenton, FL
- Lakewood Ranch, FL
- Palmetto, FL
- Parrish, FL
- Ellenton, FL
- Holmes Beach, FL
- Anna Maria Island, FL
- Longboat Key, FL
- Siesta Key, FL
- Osprey, FL
- Nokomis, FL
- Venice, FL
More services
One team for the whole project
Combine services in a single visit and a single written quote.
Bring your deck and fence back to life
Book a free estimate. We inspect the wood and recommend the right stain for it.